Bogie issue

[dave55007]

Hi,
Can anyone help me resolve this issue with the bogies of these two Motorail coaches please.




I cannot find anything obviously wrong. I presume the height of the bogie attachment is mismatched with the body attachment but I cannot find how to adjust it.

The assets are Nexusdj's (sorry, mate) kuids 2:45317:103465:1 and 2:45317:104232:1 and I'm using TS2009 build 2.9

Regards

Dave

[Nexusdj]

Which type of bogie are you trying to use and in which version of Trainz ?

[clam1952]

You can move the attachments in the carriage using IMeditor. Bottom of this N3V page. https://contentcreation.trainzsimulator ... /software/

[gamerouche]

My versions show up just fine in TRS2019, Bogies are <kuid:45317:103899>

Hope that helps.

Gam

[dave55007]

Bogies are B4 bogie (dirty) 116:0351 for the blue/grey and B4 bogie weathered 45317:104233:1 for the all-blue. Have I got the wrong bogies on them?

I'm on TS2009 build 2.9

[dave55007]

Just tried one with the bogies Gam is using and same problem.

[Nexusdj]

Due to the difference in attachment point height between the S&C Mk1's and peter hicks B4 bogie I had to use a position tab in the mesh table of the bogies config to get the Sim to render the bogie at the correct height . Given your having problems with the correct bogies then I'm wondering if the position tab is compatible with Trainz 2009 ?

[dave55007]

Ive put the Motorail GUVs into my TS12 and they are fine, so it does seem to be a TR2009 problem. Oh well, Motorail flatbeds it is at Kings Cross then.

Regards,

Dave

[clam1952]

Position Tag needs TS2010 SP2, lower than 3.3 doesn't work.

[Briggsy]

Have you tried Sudofed? That usually helps to cure annoying bogie issues

[dave55007]

Very good Briggsy, I'll give it a try.