Nexusdjs 390 pendolino
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Nexusdjs 390 pendolino
i downloaded nexusdjs pendolino all via FTP link but when i viewed it in trainz its not working can someone please help me thank you
- Hope epic97
- Past 250!
- Posts: 477
- Joined: Mon Dec 13, 2010 7:35 pm
- Trainz Version: Trainz 2010
- Trainz Build: 44653
- Author KUID: 450814
- Location: Castle cary somerset.
- Contact:
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Re: Nexusdjs 390 pendolino
i ftp link them too but nothing happendHope epic97 wrote:Have you got all the dependencies?
- Nexusdj
- Forum Veteran
- Posts: 3098
- Joined: Sun Dec 12, 2010 3:02 pm
- Trainz Version: TRS22
- Trainz Build: 123794
- Author KUID: 45317
- Location: West Midlands
- Contact:
Re: Nexusdjs 390 pendolino
The Pendolino and it's dependencies where uploaded for use with a minimum trainz build of TC1 & 2 , I see from your posts that your a 2006 user which means it wont work .
If I remember correctly it will need the trainz build and bogie entries changing , plus it will require the additional "asset-filename" entries added to the config file of each vehicle and dependency .
Before I'm asked it is a job I'm not prepared to do , so either you could attempt to convert it yourself (for own use) or I'm happy for another 2006 user who's converted it to send it you .
The alternative is to download the original version which I believe is still available via a link that can be found on the Auran forum .
If I remember correctly it will need the trainz build and bogie entries changing , plus it will require the additional "asset-filename" entries added to the config file of each vehicle and dependency .
Before I'm asked it is a job I'm not prepared to do , so either you could attempt to convert it yourself (for own use) or I'm happy for another 2006 user who's converted it to send it you .
The alternative is to download the original version which I believe is still available via a link that can be found on the Auran forum .
High visibility pixels must be worn when on or about the line !!
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Re: Nexusdjs 390 pendolino
Does it work in trainz 2009 because i got that version to
-
- Past 500!
- Posts: 716
- Joined: Tue Jan 04, 2011 12:16 pm
- Trainz Version: 12, TANE
- Trainz Build: 74702
- Author KUID: 431172
- Location: Surrey and Pembrokeshire
Re: Nexusdjs 390 pendolino
It would, yes, as its the next one up from TC.
tommietomato2 on Auran forums
Retired moderator.
Retired moderator.
- Class172
- SOTM Moderator
- Posts: 1645
- Joined: Sun Jan 23, 2011 5:10 pm
- Trainz Version: T:ANE
- Trainz Build: 94916
- Author KUID: 485742
- Location: West Country
Re: Nexusdjs 390 pendolino
The old version of the pendolino works in 2006, as I use it. Unfortunately though, I'm not sure if its available anymore.
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Re: Nexusdjs 390 pendolino
which one is it on the websites you got it from for trainz 06
- Class172
- SOTM Moderator
- Posts: 1645
- Joined: Sun Jan 23, 2011 5:10 pm
- Trainz Version: T:ANE
- Trainz Build: 94916
- Author KUID: 485742
- Location: West Country
Re: Nexusdjs 390 pendolino
I got it from the DLS, but I doubt somewhat that there still available. You might want to send a PM to Nexusdj to see if he can sort anything out.
- Warbo40
- Forum Veteran
- Posts: 2297
- Joined: Sun Dec 12, 2010 5:02 pm
- Trainz Version: TS2012 (SP1)/S&C
- Trainz Build: 57898
- Author KUID: 441222
Re: Nexusdjs 390 pendolino
It is still available on the Auran forum site linked here on page 12 and a user by the name of yamhamdan gives a link to some pendolino's compatible to 2006 i think. They are by a user by the name of spanner (jivebunny).
http://forums.auran.com/trainz/showthre ... =Pendolino
There are possibly a few errors that will need to be sorted out though which can be sorted. If you PM me James66414 after you've downloaded and then uploaded them to your CMP i will help you get rid of the errors if you ask nicely.
And here it is in all it's glory
http://forums.auran.com/trainz/showthre ... =Pendolino
There are possibly a few errors that will need to be sorted out though which can be sorted. If you PM me James66414 after you've downloaded and then uploaded them to your CMP i will help you get rid of the errors if you ask nicely.
And here it is in all it's glory
Last edited by Warbo40 on Fri Aug 19, 2011 9:57 pm, edited 1 time in total.
Work to live not live to work.
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Re: Nexusdjs 390 pendolino
hi mate i found the link downloaded and looked on trainz but the pendolino cars i didnt get working is
Pendolino Car 1
Pendolino Car 1 Drag
Pendolino Car 2
Pendolino Car 4
Pendolino Car 6
Pendolino Car 8
Pendolino Car 9
Also The Errors Please
Pendolino Car 1
Pendolino Car 1 Drag
Pendolino Car 2
Pendolino Car 4
Pendolino Car 6
Pendolino Car 8
Pendolino Car 9
Also The Errors Please
- Warbo40
- Forum Veteran
- Posts: 2297
- Joined: Sun Dec 12, 2010 5:02 pm
- Trainz Version: TS2012 (SP1)/S&C
- Trainz Build: 57898
- Author KUID: 441222
Re: Nexusdjs 390 pendolino
Right here's what you'll have to do
For the Class 390 Interior Cab the problems are - Error: No selection for tag 'att' in 'interior_main'. and Error: Attachment point att () in 'mesh-table\interior_main' was not found.
To sort this you'll have to right click your mouse button on the asset look down the list for "Edit" then with the new window then left click "Edit In Explorer" (or press Ctrl+Shift+E) to open the asset for editing. Look for the config.txt file and open it. Replace the part of the config that says
mesh "class390.im"
attachment
{
interior_main
{
mesh "class390.im"
att
}
}
WITH THIS BELOW
mesh-table
{
interior_main
{
mesh "class390.im"
}
default
{
mesh "class390.im"
auto-create 1
}
}
Save the new config and then commit the cab asset that will sort out the problem with the cab and get rid of the errors due to a faulty dependency with car 1, car 1 (drag) and car 9.
Car 2 the error is caused by Error: The Tag '#' is not permitted within a container of type 'traincar'.
Open the config of this asset then near the bottom of the config file you'll see asset-filename "virgin class 390 pendolino _ car 2" and just below that the offending error that being "#". Delete the line containing that save and commit that will get rid of that error.
Right the next one is the hardest to do without making a further mess of the config so be careful with this one. Open Car 4 asset and again open the config and where it says
mesh-table
{
default
{
mesh "390_Car_4/390_Car_4.im"
auto-create 1
effects
{
0
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
1
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
2
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
3
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
4
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
5
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
}
}
}
REPLACE WITH THE BELOW LINES
mesh-table
{
default
{
mesh "390_Car_4/390_Car_4.im"
auto-create 1
}
}
That will get rid of the error with that one. What are the errors with car 6, 8 and 9 as i haven't got any with those ?
You know how to find out what the errors are via the menu don't you ?
Also have you downloaded the 2 missing dependencies ?
After all that the only thing left should be warnings about each asset - Warning: This asset requires a shadow mesh, but the mesh table does not contain one.
This is a bit more advanced and requires a certain program and a deeper knowledge of fixing it.
For the Class 390 Interior Cab the problems are - Error: No selection for tag 'att' in 'interior_main'. and Error: Attachment point att () in 'mesh-table\interior_main' was not found.
To sort this you'll have to right click your mouse button on the asset look down the list for "Edit" then with the new window then left click "Edit In Explorer" (or press Ctrl+Shift+E) to open the asset for editing. Look for the config.txt file and open it. Replace the part of the config that says
mesh "class390.im"
attachment
{
interior_main
{
mesh "class390.im"
att
}
}
WITH THIS BELOW
mesh-table
{
interior_main
{
mesh "class390.im"
}
default
{
mesh "class390.im"
auto-create 1
}
}
Save the new config and then commit the cab asset that will sort out the problem with the cab and get rid of the errors due to a faulty dependency with car 1, car 1 (drag) and car 9.
Car 2 the error is caused by Error: The Tag '#' is not permitted within a container of type 'traincar'.
Open the config of this asset then near the bottom of the config file you'll see asset-filename "virgin class 390 pendolino _ car 2" and just below that the offending error that being "#". Delete the line containing that save and commit that will get rid of that error.
Right the next one is the hardest to do without making a further mess of the config so be careful with this one. Open Car 4 asset and again open the config and where it says
mesh-table
{
default
{
mesh "390_Car_4/390_Car_4.im"
auto-create 1
effects
{
0
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
1
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
2
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
3
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
4
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
5
{
kind "corona"
att "a.spark0"
texture-kuid <kuid:60850:99999>
object-size 0.1
directional 0
}
}
}
}
REPLACE WITH THE BELOW LINES
mesh-table
{
default
{
mesh "390_Car_4/390_Car_4.im"
auto-create 1
}
}
That will get rid of the error with that one. What are the errors with car 6, 8 and 9 as i haven't got any with those ?
You know how to find out what the errors are via the menu don't you ?
Also have you downloaded the 2 missing dependencies ?
After all that the only thing left should be warnings about each asset - Warning: This asset requires a shadow mesh, but the mesh table does not contain one.
This is a bit more advanced and requires a certain program and a deeper knowledge of fixing it.
Work to live not live to work.
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Re: Nexusdjs 390 pendolino
did car1 and saved config but launched trainz and not working still any suggestions
- Warbo40
- Forum Veteran
- Posts: 2297
- Joined: Sun Dec 12, 2010 5:02 pm
- Trainz Version: TS2012 (SP1)/S&C
- Trainz Build: 57898
- Author KUID: 441222
Re: Nexusdjs 390 pendolino
If you followed my instructions to the letter then it should work as my screenshot shows.
Work to live not live to work.
- James66414
- Milepost 7
- Posts: 99
- Joined: Sat Jun 11, 2011 8:33 pm
- Trainz Version: 2006 2009 TS12
- Trainz Build: 2
Re: Nexusdjs 390 pendolino
hi mate i read your instructions and did it 5 times but nothing happend still